Search the Community
Showing results for tags 'google maps'.
Found 4 results
Hi people, this is not a workflow, it's a snippet that shows you the location of the photo in google maps is satelite mode. this is the snippet: how to use it: open terminal activate this snippet while in Terminal open the folder where your photo is located in finder drag the photo that contains gps data to your terminal activate the terminal window and press enter It took me some time to figure out how to open the photo in Google maps in satelite mode. When you activate this snippet, note the location of the cursor, it's not at the end (for a reason 🙂 ) Oh and btw, you need to install exiftool from phil Harvey: Exiftool to use this snippet
Howdy all, So, for you fine people who have given me so many awesome workflows, I give you the Advanced Google Maps AND NOW APPLE MAPS Search Workflow available on Github --> https://github.com/stuartcryan/advanced-google-maps-alfred-workflow. A couple of quick things: Didn't you just release a major update 1.3.0? Yahuh, I most certainly did, however after that some amazing ideas came out of the woodworks, and it became a mere stepping stone to what the workflow is today. Why didn't you wait to release 2.0.0? Quite simply, I thought it was complete, however, like I mentioned above, some GREAT ideas came out in the week after release from some passionate members of the community, and I figured, WHY NOT! In putting these in, I was able to create added flexibility when re-working the code base, to support several features that previously, were not possible. Why 2.0.0 not 1.4.0? The 2.0.0 release has changed a lot, including adding Apple Maps Support, new updating mechanism, all new location for configuration, and other major changes. Hence 2.0.0 seemed more appropriate. Why 2.0.1? @deanishe found a bug in his favourite part of the flow he had been waiting for... it has now been squashed! So please enjoy, this release has had EXTENSIVE testing prior to release, I have to say I am pretty chuffed with it all around! Stuart Easy directions from or to multiple locations, using either Google Maps or Apple Maps. Now includes custom locations in addition to just home and work, auto updating, and a wealth of new features for you to sink your teeth into. Getting to Know the Flow - Course available for $14.99USD With the explosion of features, added configuration complexity, and awesomeness of the 2.0.0 major release (and overhaul), I have opted for a different tact, to ensure the support overhead is limited. I have put together an hour long course for only $14.99USD that covers off every configuration option of the workflow, how to get up and running, getting into the advanced nitty gritty, and so on. The course will be updated as any new usability or training needs are identified, and I will commit to the course being updated through the entire V2.0.0 release. I do reserve the right to extend that to the next release if I later choose. Version 1.3.0 and version 2.0.1 represent almost the entirety of my holiday break over December-2017 and January-2018. I would anticipate I have over $6000 in time into this flow for these two versions alone, plus costs for the new logo, and costs for Closed Captioning. So don't delay and check out the course, there are a few videos set to preview so you can try before you buy! Donations Alternatively if a course is not your thing... You can just donate to me directly! If everyone who downloaded gave $20, that would make me a very happy camper and give me something back for my time, it would also enable me to have a custom icon set created for the flow. So if you love the workflow, get use out of it every day, and would love to see me continuing development, a donation is a great way. You can either donate to me via Fundly which gives the option of a re-occurring donation and also has some suggestions, donate to me via Patreon (if that is your preference) or donate to me via Paypal which is nice and easy. 2.0.0+ Release Compatibility Information In 1.3.0 the home and work locations, required setting up again due to a bug with special characters. In 2.0.0 the home and work locations have been moved out of the keychain (which was a legacy method of handling them before Alfred had workflow environment variables). Old locations can still be used as they would have without further intervention. However, the mapsethome and mapsetwork commands have now been removed. To add/update these now you must do so on the workflow environment variables config screen. I would also recommend you run 'zcleanmapsoldaddresses' to remove the old addresses from your Apple keychain. Installation Ensure you have Alfred installed with the Alfred Powerpack License Download the Advanced_Google_Maps_Search.alfredworkflow file Open the .alfredworkflow file to import into Alfred Set up the workflow configuration parameters as you desire (see below for additional details), by clicking on the little [X] in the top right hand of the Workflow page in Alfred Complete the advanced steps below to add additional (and awesome) functionality Current Location Feature Installation and Configuration If you wish to use the 'Directions from Current Location - dirfc' command or the 'here' modifier, you will need to also install homebrew and the CoreLocationCLI package. Install Homebrew using instructions from https://brew.sh/ Install the CoreLocationCLI utility by running the following command in a terminal 'brew cask install corelocationcli'. Check your installed location by running 'which CoreLocationCLI' Ensure the workflow environment variable on the Workflow Configuration screen matches the installed location. Contact Address Handler Configuration If you wish to use this workflow to handle directions to a contact's address you may do so by completing the following additional steps. In Alfred's Preferences click on Features --> Contacts Double click on the 'Address' field In the dropdown, select "Search Contact Address with Advanced Google and Apple Maps Search" Ensure you correctly configure the contactHandler parameter as per the instructions under the Configuration section. Fallback Search Setup If you wish to use this workflow to handle fallback searches in Alfred, you can now do this too! In Alfred's Preferences click on Features --> Default Results Click the button to 'Setup Fallback Results' Click the small + sign to add a new record Select any of the available fallback searches provided by the workflow to add them to your personal fallback search results. Configuration Explanation of each of the Workflow Environment Variables contactHandler: Used as the default mechanism to handle Contact address searches. Supports two formats including "drive here to" (current location to Contact's address) "drive to here" (Contact's address to Current Location) or "('computerName:drive here to','default:drive here to')" CoreLocationCLIBinary: Defines the location of the installed CoreLocationCLIBinary. Supports two formats including "/usr/local/bin/CoreLocationCLI" or "('computerName:/some/other/location/CoreLocationCLI','default:/usr/local/bin/CoreLocationCLI')" currentLocationFallback: Used as the fallback address in case CoreLocationCLI is not installed, or fails (especially if WiFi is unavailable, or turned off). Supports two formats including "Some Address in Some State 20023" or "('computerName:home','someOtherComputerName:Some Address in Some State 20023','default:work')" customLocations: Supports custom location modifiers for all dir* commands. Please note, this does not dynamically add new dirfx or dirtx commands. Must be formatted in the following fashion: "('gym:49 Queens Rd, Five Dock NSW 2046','school:1A Harris Rd, Five Dock NSW 2046')" defaultTransportationMode: Defines the default transportation fallback mode if none is specified at runtime. Possible values include: "pt" for Public Transport, drive, walk or bike. Supports two formats including "bike" or "('computerName:pt','someOtherComputerName:walk','default:drive')" googleLocal: Defines which Google Locale to use such as 'com.au', 'com.tw' or 'com' as some examples. Supports two formats including "com.au" or "('computerName:com.au','someOtherComputerName:com.tw','default:com')" homeAddress: New storage location for Home Address. Supports two formats including "Some Address" or "('computerName:Some Address','someOtherComputerName:Another Address','default:A Third Address')" workAddress: New storage location for Work Address. Supports two formats including "Some Address" or "('computerName:Some Address','someOtherComputerName:Another Address','default:A Third Address')" mapsHandler: PLEASE NOTE this only supports a value of either "Google" or "Apple" and may not have a computer specific value. Recommended Example Configuration for Workflow Environment Variables contactHandler: ('default:drive here to') CoreLocationCLIBinary: ('default:/usr/local/bin/CoreLocationCLI') currentLocationFallback: ('default:home') customLocations: ('gym:GYM ADDRESS','school:SCHOOL ADDRESS') defaultTransportationMode: ('default:drive') googleLocal: com homeAddress: Your Home Address workAddress: Your Work Address mapsHandler: Google Notes on Caveats with Apple Maps Apple Maps does not support as many functions as Google Maps and there are two main areas that will cause graceful errors when using Apple Maps. If you attempt to use the 'bike' modifier anywhere, Apple Maps does not support such directions and therefore we gracefully tell you this won't work. Secondly, Apple Maps does not support waypoints or building up an itinerary. Therefore if you attempt to use the dir command with more than just an origin and a destination (such as home to shops to work), we will gracefully error out and tell you such a function is not possible. Usage dir to to etc (seperate multiple addresses with " to " minus the quotes, and you will get a multiple location search when using Google Maps only) [NEW] dir now does all the heavy lifting. You can use the modifiers 'here' (current location, must have CoreLocationCLI installed), 'work' and 'home' in any query. For example 'dir home to work to new york'. [NEW] dirfc this will use your current location (WiFi card must be active) to the destination. [NEW] dirtc Show directions from query to current location [NEW] All commands now support the following modifiers: walk, bike, drive, pt (public transport). The modifier can be invoked by 'dirX ' e.g. 'dirfw pt home ' will give you public transport directions. This also works with 'dir' and multiple waypoints. Please note, the transport modifier must be the first parameter you pass to any dirX command, for example 'dirfw home pt' is not valid. [NEW] Localisation now defaults to USA, hence make sure you update workflow parameters if you wish to use a different country code on the Google URL. dirfw Show directions from Work to address dirfh Show directions from Home to address dirtw Show directions from query to Work address dirth Show directions from query to Home address trafficw - Show traffic from Home to Work traffich - Show traffic from Work to Home [NEW] dir now supports up to 9 waypoints for Google Maps. For example 'dir origin to waypoint 1 to waypoint 2 etc to destination' Integration hooks for Other Workflow Providers This workflow now supports integration using external nodes. They suppor the same methods and modifiers as described for the rest of the workflow. This means you can now hook into this workflow to leverage the 'here', 'work', 'home' and other custom modifiers set up by a user, as well as provide routing directions based on your input. Please review the workflow for each of the hooks available. History Version 2.0.2 Fixed comma issues in all the dirfX commands by quoting the strings Version 2.0.1 Fixed dirtw bike command... it hadn't been connected... after all the testing! #oops Thanks @deanishe Version 2.0.0 Renamed workflow to 'Advanced Google and Apple Maps Workflow for Alfred'. Left bundleID intact deliberately Changed workflow logo to support new multi-brand mix Added feature for custom locations other than 'home' and 'work' Added default transportation mode setting Added fallback location setting in case there are issues with CoreLocationCLI Added hooks for Alfred fallback searches (for example if you load Alfred and just enter an address without invoking the workflow) Added multi-machine configuration parameters and provided a default catchall feature for this Added contact address handler functionality (to enable the workflow to serve as a Contact Address Handler hook) Migrated (future) work and home addresses out of keychain. Added keychain cleanup function once addresses have been manually migrated to workflow environment variables Implemented OneUpdater code by Vitor so updating will be simple as pie Externalised Perl code for much better gitifying, as well as better code reuse Added external triggers for other workflows to hook into Various code cleanups Significantly improved error handling to do things more gracefully Rectified issues with commas in addresses causing things to break a little Other minor bug fixes and improvements as I went along through the code, improved readability also Released an hour long course to help people get the workflow up and running. Version 1.3.1 Fixed dirfh and dirfw to actually use home and work respectively, not here. #oops Version 1.3.0 dirfc: Directions from Current Address. See the installation instructions above to install Homebrew and CoreLocationCLI dirtc: Directions to Current Address. See the installation instructions above to install Homebrew and CoreLocationCLI dir, dirfc and dirtc now support Google transit type (walk, drive, pt [public transport] and bike) dir now supports 'here'. Here anywhere in the transit plan translates to the current GPS coordinates using CoreLocationCLI. Technically this probably does away with the need for dirfc and dirtc, but, leaving them there for consistency. dir now supports 'work' and 'home' as modifiers Overhaul of changes to properly use Google API parameters Mass code cleanup and refactoring for simplification. Most flows now leverage the dir base code. Additional error handling implemented surrounding maximum number of waypoints Fixed a bug where special characters would not work in stored URLs Implemented a workflow environment variable for getting a local Google URL Changed to use Alfred's native URL opening functionality, this enables you to select a preferred browser Version 1.2 - Actually this never made it out of beta, despite working, I have been kinda busy. Version 1.1 - Set default search to be google.com rather than google.com.au Version 1.0 - Initial Release Credits Created by Stuart Ryan. If you would like to get into contact you can do so via: @StuartCRyan on Twitter Stuart Ryan on LinkedIn Technical Notebook Blog License Released under the GNU GENERAL PUBLIC LICENSE Version 2, June 1991
Route to contact or location This workflow calculates the route from the current location to a contact from your address book, or a specified location with Google Maps. The scripts are written in python and use the pre-installed objective-c bridge pyobjc to search the address book and determine the current location with CoreLocation. Because of this, OS X will display messages that ask for the permission to use CoreLocation and AddressBook. Requirements: The scripts use the shipped python version and the nice alfred module by nikipore (included). Because of the usage of OS X APIs there are requirements for the OS X version. I developed and tested the workflow on 10.8.4, 10.9.0 and 10.9.1, but perhaps older versions are also working (feedback?). Usage: Simply type "route" followed by the first or last name of a contact and choose the right one from the list. You can also just type an address to which you want the route to be calculated. Download: You can download the workflow from Packal https://github.com/abyth/alfred-route-contact-workflow Feel free to submit error reports or feature requests Important!: After implementing new features, the workflow title was sufficient anymore. You can find the new version here in the forum History 1.1Fixed index bugs regarding multiple addresses per contact 1.0Initial release
Hi there, I am very new to alfred and I needed a google map workflow. based on Derick Fay's Rome2Rio workflow, I adapted it for gmap. That's a very quick one so maybe you could improve it basically just type : gmap <starting point> : set your starting point then it pops up for a destination And there you go feel free to do anything you want to improve it hope this helps DOWNLOAD : https://www.dropbox.com/s/2bl2ue4zh0lka5v/Google%20Maps.alfredworkflow