Search the Community
Showing results for tags 'router'.
DHCP Toggle Find it on: Packal: DHCP Toggle Github: DHCP Toggle Repository Short Description Set your DHCP Settings via Alfred. Long Description DHCP Toggle allows you to alter your DHCP settings between a manual and an automatic configuration. When you set an automatic configuration, which is normal, your computer will receive an IP address directly from the router that you’re connected to. If you choose manual, you have the option of setting your own IP address. If the router’s IP address is 10.0.1.1, then you’ll be able to get an IP with a prefix of 10.0.1 and a suffix between 2 and 255. If the IP address is already used, then you’ll have to try again. DHCP Toggle will also set your router address to the IP prefix that you use, followed by 1, which is always reserved for the router. You can use this when your Internet connection is weak, or if a router is clogged, or if, for some random reason, the router doesn’t like you connecting with an automatic IP address (the original need for this workflow). Commands dhcp <arg> Available arguments: None: defaults to your default IP prefix + random number 2–255 Switch to auto: auto IP Address: 10.0.1.192 Number: 2–255, i.e. 32 Configure c Configuration Default Prefix You can set a default prefix, the first three numbers of an IP address, which will be given precedence over the other available prefixes. If you just type a three-digit number (between 2–255), then it will set your IP address to DEFAULTIP.NUMBER. IP Prefixes You can set a list of prefixes that you commonly use, and those will appear in the script filter to choose easily. If no prefixes file is found, then the following list will be populated: 10.0.0 10.0.1 192.168.0 192.168.1 192.168.2 192.1.10 You can add and remove from this list from the configuration option. Passwordless Execution (sudo) If you would prefer to use this workflow without a password, you can select the option to add a record to your sudoers file. The script will add the line $USER ALL=NOPASSWD:/usr/sbin/networksetup to your /etc/sudoers file, where $USER is your username; so, the $USER will now be able to execute the command networksetup without needing to enter a password. The script checks the syntax with visudo to make sure that it doesn’t bork your /etc/sudoers file. So, it’s safe. Demo Credit Thanks for version 2.0 goes to Pryley (Github | Alfred Forum) who opened a pull request for the added features and contributed some code. Issues Please report coding issues on the Github issue queue. Other support should be posted on the Alfred Forum thread.