Alfred remote cannot connect [Resolved]

[Ra-f]

i recently downloaded alfred remote and i was exited about it ...

but alfred remote cannot find alfred 2 , on iphone just showing wi-fi animation same as mac app,nothing happen at all .... in the past i used apps like LK Bridge for ableton live (Remotely control ableton live) or remote app for Playstation and i didn't have  any problem with those apps...

 

 

iphone 5:

 

 

ip= 192.168.1.101

 

subnet mask= 255.255.255.0

 

router= 192.168.1.1

 

dns= 192.168.1.1

 

 

 

 

imac (osx yosemite 10.10.4) :

 

 

IPV4 Address= 192.168.1.100

 

subnet mask= 255.255.255.0

 

router= 192.168.1.1

 

dns= 192.168.1.1

 

 

 

create new user and test? YES

reset network setting for both iphone and mac? YES

turn off firewall? YES

Edited December 7, 2015 by Ra-f

[Vero]

 

i recently downloaded alfred remote and i was exited about it ...

but alfred remote cannot find alfred 2 , on iphone just showing wi-fi animation same as mac app,nothing happen at all .... in the past i used apps like LK Bridge for ableton live (Remotely control ableton live) or remote app for Playstation and i didn't have  any problem with those apps...

 

Have you tried setting up Direct Connect between your Mac and your iPhone? You can do this by tapping the "Add" button in Alfred Remote, then choosing "Direct" in the top right of the connection screen.

 

When using Direct Connection, we recommend using a static IP address for a more predictable behaviour. You can also use your Mac's hostname (e.g. Veros-Mac.local).

 

Enter your IP address and the port number. Your IP address is set in OS X (usually automatically), while you can set the port in Alfred's server configuration.

 

Let me know if you need any help with this

 

Cheers,

Vero

[Ra-f]

 

Have you tried setting up Direct Connect between your Mac and your iPhone? You can do this by tapping the "Add" button in Alfred Remote, then choosing "Direct" in the top right of the connection screen.

 

When using Direct Connection, we recommend using a static IP address for a more predictable behaviour. You can also use your Mac's hostname (e.g. Veros-Mac.local).

 

Enter your IP address and the port number. Your IP address is set in OS X (usually automatically), while you can set the port in Alfred's server configuration.

 

Let me know if you need any help with this

 

Cheers,

Vero

 

 

i linked mac and ADSL via LAN , and now i can use Alfred Remote   thanks anyway !

[Vero]

i linked mac and ADSL via LAN , and now i can use Alfred Remote   thanks anyway !

 

Excellent, glad you're all up and running now